Product View And Parts Identification - Craftsman 113.206891 Owner's Manual

6.Attachslidingguardto
fence with two pan head
screws and lockwashers,
7. Place one Sliding Guard Washer, concave side DOWN
on support rod.
8. Drop sliding guard onto rod,., place other washer,
concave side UP on rod.., screw on Sliding Guard
Knob.
SLIDING GUARD KNOB
:10-32xl/4 SCREWS'_
EXT. TOOTH
LOCKWASHERS
WASH ER
(CONCAVE SIDE UP)
getting to know your jointer-planer
WARNING: FOR YOUR OWN SAFETY TURN SWITCH
"OFF"AND REMOVE PLUG FROM POWER SOURCE
OUTLET BEFORE MAKING ANY ADJUSTMENTS.
FENCE TILT SCALE
(BEHIND FENCE)
2 FENCE \,
LOCK
KNOB
FENCE
OUTFEED TABLE
2
SLIDING GUARD
KNOB
BACK OF
JOINTER
5 INFEED
TABLE
Ii
SLtDE
BRACKET
F.O.TOF / \
JOINTER 4 CUTTER GUARD 6 ON-OFF DEPTH OF CUT
SWITCH
1
HANDWHEEL
DEPTH OF CUT HANDWHEEL. Tu_rning the hand-
wheel counterclockwise will lower the infeed table
to maximum depth of 1/8 in.
i_N%p /i D_PTH OFCUT
.... /At_LI_
/ _ HANDWHEEL
___,.___/ / DOWN