System Settings Menu; Operating Without Using The Gui; Network Update - Sony STR-DN1040 Operating Instructions Manual

System Settings menu

You can adjust the settings of the receiver.
x Language
Lets you select the language for the
messages on the screen.
• English
• Español
• Français
• Deutsch
x Auto Standby
Lets you set the receiver switch to standby
mode automatically when you do not
operate the receiver or when there is no
signals input to the receiver.
• On: Switches to standby mode after
approximately 20 minutes.
• Off: Does not switch to standby mode.
Notes
• This function does not work in the following
cases.
– "FM TUNER", "AM TUNER", "HOME
NETWORK" or "SEN" input is selected.
– AirPlay or PARTY STREAMING function is
being used.
– The software of the receiver is being updated.
• If you use the Auto standby mode and the Sleep
Timer at the same time, the Sleep Timer has
priority.
x Software Update Notification
Lets you set whether or not to inform you of
newer software version information on the
TV screen.
• On
• Off
Note
New software version information does not
appear in the following cases.
– The latest version is already being used.
– The receiver cannot obtain data via a network.
x Software Version
Lets you check the software version of the
receiver.
102
US
x Network Update
Lets you update the software of the receiver
to the latest version. For details, see
"Updating the software" (page 75).
Operating without using
the GUI
You can operate this receiver using the
display panel even if the TV is not
connected to the receiver.
DISPLAY
RETURN
O
Using the menu on the
display panel
1
Press AMP MENU.
The menu is displayed on the display
panel of the receiver.
2
Press V/v repeatedly to select the
menu you want, then press
3
Press V/v repeatedly to select the
parameter you want to adjust, then
press .
4
Press V/v repeatedly to select the
setting you want, then press
To return to the previous
display
Press B or RETURN O.
To exit the menu
Press AMP MENU.
AMP MENU
V/v/B/b,
.
.