Sony STR-DN1040 Operating Instructions Manual page 63

6
Select [Allow All].
The [Allow All Media Devices]
window opens.
If all the devices in the local network
are set to [Allowed], select [OK] and
close the window.
7
Select [Allow all computers and
media devices].
8
Select [OK] to close the window.
9
Refresh the server list.
When the settings are completed,
refresh the server list of the receiver
and select this server from the server
list. For details on selecting a server,
see "To refresh the server list"
(page 66).
When using Windows 7
This section explains how to set up
manufacturer-installed Windows Media
Player 12 for Windows 7.
For details on how to operate Windows
Media Player 12, refer to Help for
Windows Media Player 12.
1
–
Go to [Start]
2
Select [View network status and
tasks] under [Network and
Internet].
The [Network and Sharing Center]
window appears.
Tip
If the item you want does not appear on the
display, try to change the display type of the
Control Panel.
3
Select [Public network] under
[View your active networks].
If the display shows other than
[Public Network], go to step 6.
The [Set Network Location] window
appears.
[Control Panel].
63
US