Specifications - Sony STR-DN1040 Operating Instructions Manual

USB FAIL
An over current from the
was detected. The receiver will
automatically turn off after a few
seconds. Check the iPod/iPhone or USB
device, then unplug it and turn on the
power again.
For other messages, see "Message list after
Auto Calibration measurement" (page 94),
"iPod/iPhone message list" (page 49),
"USB message list" (page 51) and
"Network features message list" (page 76).
Clearing the memory
Reference sections
To clear
All memorized settings
Customized sound fields
About support
information
Refer to the following web site for details
of the latest information on the receiver.
For customers in the USA:
http://www.esupport.sony.com/
For customers in Canada:
[English]
http://www.sony.ca/ElectronicsSupport/
[French]
http://fr.sony.ca/ElectronicsSupport/
For customers in Latin America:
http://esupport.sony.com/LA
For customers in Brazil:
http://esupport.sony.com/BR

Specifications

(USB) port
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
(USA model only)
With 6 ohm loads, both channels driven,
from 20 – 20,000 Hz; rated 100 watts per
channel minimum RMS power, with no
more than 0.09% total harmonic distortion
from 250 milliwatts to rated output.
Amplifier section
USA and Canada models
Minimum RMS Output Power
See
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
page 90
page 60 Stereo Mode Output Power
(6 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(6 ohms, 1 kHz, THD 0.9%)
Mexico model
Minimum RMS Output Power
(6 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power
(6 ohms, 1 kHz, THD 1%)
Surround Mode Output Power
(6 ohms, 1 kHz, THD 0.9%)
Brazil model
Surround Mode Output Power
(6 ohms, 1 kHz, THD 10%)
1)
100 W + 100 W
120 W + 120 W
165 W per channel
1)
95 W + 95 W
110 W + 110 W
145 W per channel
1)
165 W per channel
2)
2)
2)
127
US