Bravia" Sync Features; What Is "Bravia" Sync; Preparing For The "Bravia" Sync - Sony STR-DN1040 Operating Instructions Manual

"BRAVIA" Sync Features

What is "BRAVIA"
Sync?
The "BRAVIA" Sync function allows
communication between Sony products
such as TV, Blu-ray Disc player, DVD
player, AV amplifier, etc. that supports the
Control for HDMI function.
By connecting Sony equipment that is
compatible with the "BRAVIA" Sync with
an HDMI cable (not supplied), operation is
simplified as follows:
• One-Touch Play (page 83)
• System Audio Control (page 83)
• System Power-Off (page 83)
• Scene Select (page 84)
• Home Theatre Control (page 84)
• Remote Easy Control (page 84)
Control for HDMI is a mutual control
function standard used by HDMI CEC
(Consumer Electronics Control) for HDMI
(High-Definition Multimedia Interface).
We recommend that you connect the
receiver to products featuring "BRAVIA"
Sync.
Notes
• You may use "One Touch Play", "System
Audio Control", and "System Power-Off"
function with non-Sony equipment. However,
compatibility with all non-Sony equipment is
not guaranteed.
• "Scene Select" and "Home Theatre Control"
features are Sony proprietary functions. They
cannot operate with non-Sony equipment.
• Equipment not compatible with "BRAVIA"
Sync cannot activate these features.
• The Control for HDMI function does not work
on an equipment connected to the HDMI OUT
B jack of the receiver.
• Some of the operations may be supported when
you connect a MHL device (page 85).
82
US
Preparing for the
"BRAVIA" Sync
Set the Control for HDMI function of the
receiver and the connected equipment to on
individually.
1
Select "Settings" from the home
menu, then press
The Settings menu list appears on the
TV screen.
2
Select "HDMI", then press
3
Select "Control for HDMI", then press
.
4
Select "On", then press
The Control for HDMI function of the
receiver is set to on.
5
Press HOME to exit the GUI menu.
6
Select the HDMI input of the receiver
and TV to match the HDMI input of
the connected equipment, so that the
image from the connected
equipment is displayed.
7
Set the Control for HDMI function of
the connected equipment to on.
For details on setting the TV and
connected equipment, refer to the
operating instructions of the respective
equipment.
8
Repeat steps 6 and 7 for other
equipment that you want to use the
Control for HDMI function.
Note
When you unplug the HDMI cable or change
the connection, perform the steps above.
V/v/b,
HOME
.
.
.