Download  Print this page

5: Connecting The Antennas (aerials) - Sony STR-DN1040 Operating Instructions Manual

Multi channel av receiver.
Hide thumbs


Table of Contents
A Optical digital cord (not supplied)
B Audio cord (not supplied)
C Component video cord (not supplied)
D Video cord (not supplied)
E Coaxial digital cord (not supplied)
Recommended connection
Alternative connection
* When you connect equipment with an
OPTICAL jack, reassign the input jacks. For
details, see "Using other video/audio input
jacks (Input Assign)" (page 86).
• Be sure to change the default setting of the
VIDEO 1 input button on the remote control so
that you can use the button to control your DVD
recorder. For details, see "Programming the
remote control" (page 108).
• You can rename the VIDEO 1 input so that it
can be displayed on the receiver's display panel.
For details, see "Name" in Input Settings menu
(page 100).
Connecting an iPod, iPhone,
USB device
iPod, iPhone,
USB device
A USB cable (not supplied)
5: Connecting the
antennas (aerials)
Before connecting the antennas (aerials),
be sure to disconnect the AC power cord
(mains lead).
AM loop antenna (aerial)
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and
other equipment.
• Be sure to fully extend the FM wire antenna
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
FM wire antenna (aerial)


Table of Contents

   Related Manuals for Sony STR-DN1040

Comments to this Manuals

Symbols: 0
Latest comments: