Sony STR-DN1040 Operating Instructions Manual page 79

5
Press to start the pairing.
"Pairing. Make the Bluetooth device
ready to be detected by the receiver."
appears on the TV screen.
Note
If passkey is required on the
device, enter "0000".
6
Once pairing is completed, the
device is automatically connected
to the receiver.
Device name appears on the TV
screen.
7
Start playback on the Bluetooth
device.
8
Adjust the volume.
Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
receiver.
To cancel pairing operation
Press RETURN O.
Using the button on the
receiver
1
Place the Bluetooth device within
1 meter (3.3 feet) from this receiver.
2
Press BLUETOOTH to select
Bluetooth function.
3
Hold down BLUETOOTH for
2 seconds to activate the pairing
mode of the receiver.
"PAIRING READY" appears and "BT"
flashes quickly on the display panel.
Perform step 4 within 5 minutes,
otherwise pairing will be canceled. In
this case, repeat this step.
4
Perform pairing on the Bluetooth
device to detect this receiver.
For details, refer to the operating
instructions of your Bluetooth device.
A list of detected devices may appears
on the Bluetooth device display
depending on the type of Bluetooth
device. This receiver is displayed as
"STR-DN1040".
Note
Bluetooth
When establishing a connection with this
receiver, select the audio profile (A2DP,
AVRCP) at the Bluetooth device. If the
Bluetooth device does not support the AVRCP
profile, you cannot perform playback or other
operations with this receiver (page 78).
5
Select "STR-DN1040" on the
Bluetooth device display.
If "STR-DN1040" is not displayed,
repeat from step 1.
Note
If passkey is required on the display of the
Bluetooth device, enter "0000".
6
Once pairing is completed, the
device is automatically connected to
the receiver.
Device name appears and "BT" lights up
on the display panel.
7
Start playback on the Bluetooth
device.
8
Adjust the volume.
Adjust the volume of the Bluetooth
device first, if the volume level is still
too low, adjust the volume level on the
receiver.
To cancel pairing operation
Hold down BLUETOOTH after step 3.
"CANCEL" appears on the display panel.
Notes
• Passkey may be called "Passcode", "PIN code",
"PIN number" or "Password".
• You can pair up to 9 Bluetooth devices. If 10th
Bluetooth device is paired, the least recently
connected device will be replaced by the new
one.
• Depending on the type of Bluetooth device, you
can adjust the volume using the controls of the
Bluetooth device.
79
US