PLC-XD2200/2600
Expand Serial Command Functional Specifications
9.11.20 CR_KEYDIS Command
Command
"CR_KEYDIS"(CR)
Details
Get disability status of RC/Projector keys (valid or invalid)
Acceptable
Response
%a
Unacceptable
9.11.21 CR_PJLOCKNOW Command
Command
"CR_PJLOCKNOW" [CR]
Details
Get if PJ lock is actually in operation
Acceptable
Response
%1
Unacceptable
9.11.22 CR_PJLOCKMENU Command
Command
"CR_PJLOCKMENU" [CR]
Details
Get status of PJ Lock on Menu
Acceptable
Response
%1
Unacceptable
9.11.23 CR_FANMODE Command
Command
"CR_FANMODE"[CR]
Details
Get selected Fan mode
Acceptable
Response
%a
Unacceptable
9.11.24 CR_FANCONTROL Command
Command
"CR_FANCONTROL"[CR]
Details
Get selected Fan control setting status
Acceptable
Response
%a
Unacceptable
"000_%a"[CR]
"NONE" -------------------------- RC / Projector keys are valid
"RC" ------------------------------ RC keys are invalid
"KEY" ----------------------------- Projector keys are invalid
"Error Code" [CR]
"000_%1[CR]
"LOCK" ------------- PJ Lock is in operation. PJ Lock status is ON-1
or ON-2 on Menu, and PJ PIN CODE is not
entered so that projector is actually locked.
"FREE" ------------- PJ Lock is released. PJ Lock status is OFF, or,
status is ON-1 or ON-2 on Menu but PJ PIN
CODE is entered correctly so that PJ Lock is
released.
"Error Code" [CR]
"000_%1[CR]
"ON1" ------------- PJ Lock status is On-1
"ON2" ------------- PJ Lock status is On-2
"OFF" ------------- PJ Lock status is OFF
"Error Code" [CR]
"000_%a"[CR]
"L1" ----------------------- Fan mode is L1
"L2" ----------------------- Fan mode is L2
"Error Code" [CR]
"000_%a"[CR]
"OFF" ----------------------- Fan control is OFF
"ON1" ----------------------- Fan control is ON1
"ON2" ----------------------- Fan control is ON2
"Error Code" [CR]
65 / 71