Cf_Freeze Command; Cf_Vmute Command - Sanyo PLC-XD2200 - XGA Able Multimedia Projector Manual

PLC-XD2200/2600 Expand Serial Command Functional Specifications

8.11.4 CF_FREEZE Command

Command "CF_FREEZE_%1"[CR]
"ON" ------------------------ Set Freeze to ON
"OFF" ----------------------- Set Freeze to OFF
"UP" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
%1
"DN" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
Note) "UP" and "DN" behave the same.
Set/Cancel Freeze setting.
Although projector returns "000", receiving another Freeze command does not
Details
release Freeze operation.
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable

8.11.5 CF_VMUTE Command

Command "CF_VMUTE_%1"[CR]
"ON" --------------------------- Set No show ON
"OFF" ------------------------- Set No show OFF
"UP" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
%1
"DN" ------------------------------ Switch setting (On → Off → On → ÿ e ÿ e ÿ e )
Note) "UP" and "DN" behave the same.
Set/Cancel No show setting.
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
44 / 71