Closing The Printer System Board - Lexmark Optra Color 45 User Manual

Installing Options
242
Chapter 9: Memory and Option Cards
2
Push in on the right side of the option card, on the metal
shield from the back of the printer, to release it from the
option card connector.
Note: You hear the option card snap as it releases from the
option card connector.
3
Gently pull the option card out of the connector.
Option Card
4
Place the option card in its original packaging.
If you did not save the packaging, wrap the option card in
paper and store it in a box.
5
If you need to install an option card, see "Installing an
Option Card" on page 237.
6
Continue with "Closing the Printer System Board on the
Right Side of the Printer" on page 243.