Lexmark Optra Color 45 User Manual page 92

Tests Menu Selections (Continued)
Menu Item Values and Functions of the Menu Items
Factory Defaults Restore
Do Not Restore
If you choose Restore:
• All downloaded resources (fonts, macros, symbol sets) in printer
• All menu settings are returned to the factory default values except:
- Display Language (SETUP MENU) which is the operator panel
- All settings in the PARALLEL MENU, SERIAL MENU, NETWORK
Format Flash Yes
No
Formatting the flash memory option deletes all resources (fonts, macros,
symbol sets) stored in flash memory and prepares the flash memory card to
receive new resources.
The Format Flash menu item only displays if the installed flash memory
option is not defective or Read/Write or Write protected. 51 Defective
Flash may display when the printer is plugged in, or during flash format
and write operations. See 51 Defective Flash on page 155 for more infor-
mation.
Warning: If you select Format Flash and then press Go, any data stored in
flash memory is lost. Do not turn off the printer when the flash is formatting.
Format Disk Yes
No
Formatting the hard disk option deletes all resources stored on the hard
disk and prepares it to receive new resources.
The Format Disk menu item only displays if the installed hard disk option
is not defective or Read/Write or Write protected. 61 Defective Disk may
display when the printer is plugged in, or during disk format and write
operations. See 61 Defective Disk on page 157 for more information.
Format Disk does not display if Job Buffer Size is set to 100%.
Warning: If you select Format Disk and then press Go, any data stored on
the hard disk option is lost. Do not turn off the printer when the hard disk is
formatting.
* Factory default
memory (RAM) are deleted. (Resources residing in the flash memory
option or on the hard disk option are unaffected.)
display language
MENU, INFRARED MENU, and LOCALTALK MENU.
Chapter 3: Using the Operator Panel and Menus
Using Your Printer
75