Lexmark Optra Color 45 User Manual page 242

6
Make sure both metal clips on the connector are fastened,
and the two pins on each end of the connector are pushed
through the holes on the flash memory option.
Clip
7
Replace the code SIMM card in the connector.
The code SIMM card installs exactly like the flash memory
option. See steps 4 through 6 beginning on page 224 if you
need help.
8
Continue with "Closing the Printer System Board on the
Back of the Printer" on page 228.
Installing Options
Pins
Chapter 9: Memory and Option Cards
Clip
225