Printing On Letterhead; Tray Linking - Lexmark Optra Color 45 User Manual

Printing on Letterhead

Preprinted letterhead must be acceptable for use with your printer.
Check with the manufacturer or vendor to determine whether the
letterhead you've chosen is acceptable for inkjet printers.
Page orientation is important when printing on letterhead. Refer to
the following table for help when loading letterhead in the paper
sources.
Paper Source
Standard Input Tray
Manual Feed Slot
Optional Tray 2

Tray Linking

Tray linking is a printer feature that is available if the optional
tray 2 is installed. Tray linking enables the automatic linking
feature for the paper sources, allowing you to print from one paper
source should the other one become empty.
For example, if you have letter-size print material loaded in the
standard input tray and the optional tray 2, and the input tray
becomes empty, the printer selects print material from tray 2.
Note: If you load the same size print material in each paper source,
Place Print Side...
Down
Up
Up
make sure the print material is all the same type. If you use
different print material in the paper sources, each source
with a different print material must have the PAPER TYPE
set to a unique value to disable the automatic linking
feature. For example, if you did not make sure all paper
sources have the same type when they are linked, you could
send a report to print and if you have letterhead paper
loaded into one paper source, you could print the report on
letterhead paper.
Using Your Printer
Place Leading Edge...
In First
In First
In First
Chapter 4: Using Print Materials
141