Lexmark Optra Color 45 User Manual page 144

2
Place a single sheet of print material face up with the side
of the print material aligned against the right side of the
manual feed slot as shown.
For information about printing on letterhead, see page 141.
Note: Feed only one sheet of print material at a time. If you
try to load more than one sheet, the printer may
attempt to feed all of the print material through the
paper path, causing a paper jam or damaging the
printer.
3
Slide the sheet of print material as far as it will go into the
manual feed slot.
If you do not insert the print material far enough into the
manual feed slot, it may skew or not feed at all.
4
Send your job to print.
Note: Remove each transparency or sheet of glossy paper from the
output bin before the next one is printed if you have a
problem with the ink smearing.
Using Your Printer
Chapter 4: Using Print Materials
127