Installing an Option Card
Before installing an option card, follow the steps under "Accessing
the Printer System Board on the Right Side of the Printer" on
page 236.
W
ARNING
Complete the following steps to install a hard disk option card,
INA option card, Tri-Port interface option card, or parallel option
card:
1
2
3
The option card is easily damaged by static
:
electricity. Touch something metal before you
touch the card.
Remove the two screws from the metal plate covering the
opening for the cable connector. Save the screws.
Remove and discard the plate.
Unpack the option card. Save the packing materials.
Installing Options
Chapter 9: Memory and Option Cards
237