Lexmark Optra Color 45 User Manual page 147

Using Your Printer
130
Chapter 4: Using Print Materials
Note: Feed only one sheet of print material at a time. If you
try to load more than one sheet, the printer may
attempt to feed all of the print material through the
paper path, causing a paper jam or damaging the
printer.
5
Slide the sheet of print material as far as it will go into the
manual feed slot.
If you do not insert the print material far enough into the
manual feed slot, it may skew or not feed at all.
6
Press Go.
Notes:
•
Remember to change the Paper Source setting back to
Tray 1 when you are finished using the manual feed slot.
•
Remove each transparency or sheet of glossy paper from
the output bin before the next one is printed if you have a
problem with the ink smearing.