4
Flex the sheets back and forth to loosen them, then fan
them. Do not fold or crease the paper. Straighten the edges
on a level surface.
Note: For this setup, load letter-size paper.
5
Place the print material against the right side of the input
tray with the recommended print side face down and the
top edge going in first toward the back of the input tray
as shown.
For information on how to load letterhead, see "Printing on
Letterhead" on page 141.
Stack Height Indicator
Note: Do not exceed the maximum stack height indicated
by the arrow on the right side of the input bin.
Using Your Printer
Chapter 4: Using Print Materials
123