Lexmark Optra Color 45 User Manual page 248

You can purchase:
•
•
Complete the following instructions to attach the hard disk to the
adapter card. If your disk is already attached to a card, skip to
"Accessing the Printer System Board on the Right Side of the
Printer" on page 236.
Attaching a Hard Disk to the Adapter Card
You can use the adapter card with any hard disk meeting the
following criteria:
•
•
•
To attach the hard disk to the adapter card:
1
An adapter card with the hard disk already installed.
A hard disk adapter card for installing a hard disk.
2.5-inch platter
ATA-2 (IDE) interface
Maximum thickness of 15 mm (.59 in.)
Align the connector pins on the end of the hard disk with
the connector on the back of the adapter card.
Installing Options
Chapter 9: Memory and Option Cards
231