Lexmark Optra Color 45 User Manual page 93

Using Your Printer
Tests Menu Selections (Continued)
Menu Item
Job Acct Stat
Hex Trace
* Factory default
76
Chapter 3: Using the Operator Panel and Menus
Values and Functions of the Menu Items
Print
Clear
The Job Acct Stat menu item only displays if a hard disk option is
installed in your printer and is not defective or Read/Write or Write
protected.
Select Print to print a list of statistics for a defined number of the most
recent print jobs. (The number of jobs is determined by the value of the Job
Acct Limit menu item in the SETUP MENU.) The statistics include whether
the job printed with or without errors, the time required to print the job, the
size (in bytes) of the job, the requested paper size and paper type, the total
number of printed pages, and the number of copies requested.
Select Clear to delete all accumulated job statistics from the hard disk
option. Clearing Job Accounting Stat displays until the process
completes. For more information, see Clearing Job Accounting Stat on
page 146.
Press Select to enter Hex Trace mode.
Hex Trace helps isolate the source of a print job problem. With Hex Trace
selected, all data sent to the printer is printed in hexadecimal and character
representation. Control codes are not executed.
To exit Hex Trace, reset or unplug the printer. To reset the printer, press
Menu> or <Menu. The Job Menu displays. Press Menu> or <Menu until
Reset Printer appears on the second line of the operator panel display.
Press Select.