Using The Network Menu Options; Tcp/Ip - Konica Minolta bizhub 40P/40PX Reference Manual

Using the Network Menu Options

If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
When manually setting the IP address, Subnet Mask, and Gateway
turn off DHCP, BOOTP, or ARP/PING first.
For details on specific terms used in the Ethernet menu, refer to "Net-
work Printing" on page 167.

TCP/IP

ENABLE
Purpose
Options
Default
IP ADDRESS
Purpose
Range
Default
SUBNET MASK
Purpose
Range
Default
Ethernet Menu
Enables or disables TCP/IP.
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
YES
NO
YES
Sets the IP address of this printer on the network.
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
000.000.000.000
Sets the subnet mask value of the network. The subnet
mask allows you to limit access to your printer (for exam-
ple, according to departmental divisions).
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each
number; use the Left and Right keys to move between trip-
lets.
255.255.000.000
149