Maintenance Mode; Loading Paper - Dell 928 User Manual

Discovery Mode
Security
Passkey
Device Name
Device Address
Paper Type
See "Printing from a Bluetooth-Enabled

Maintenance Mode

Maintenance
Action
Menu Item
Ink Levels Displays the percentage of ink left in the cartridges.
Clean Cartridge Cleans the cartridges and prints a test page. This operation takes a couple of minutes.
Aligns the cartridges while printing a test page. This operation takes a few minutes. It is not possible
Align Cartridges
to interrupt the operation until it completes.
Change Print
The printer display shows the sequence of actions to be performed to change ink cartridges.
Cartridges
Print Demo Page Prints a demo page so that the print quality can be checked.
Reset Defaults Restores the factory default settings.

Loading Paper

1. Fan out the paper.
2. Insert the paper into the paper feeder, aligned on the right.
Set this mode to Enabled if you want other Bluetooth-enabled devices to be able to detect
the USB Bluetooth adapter connected to your printer.
Set the security level for the printer on the Bluetooth network.
Low (default)
High
Specify the passkey. This is the password that must be entered by any external Bluetooth-
enabled device before sending a print request, so that the printer accepts the request.
The default password is 0000.
The name assigned to the USB Bluetooth adapter.
When printing from a Bluetooth-enabled device, you must specify either the Device Name
or the Device Address.
Address of the USB Bluetooth adapter.
When printing from a Bluetooth-enabled device, you must modify to select either the
Device Name or the Device Address.
The address of a device cannot be modified.
Type of paper: Plain, Coated, Photo, Transparency.
Device" for more details.