Dell 928 User Manual page 65

Press Select to try
alignment again.
Card Format
Memory card formatting
not correct. Format card
in digital camera.
Support jammed
1 Remove support jam
2 Press Select to
continue.
Cartridge Error
Insert cartridges in correct
positions:
Left: Black or Photo
Right: Colour
Cartridge missing
Install the black or photo
cartridge on the left.
Cartridge missing
Install a colour cartridge
on the right.
Error XXXX
No computer
Check that the computer
is connected and
switched on.
Paper Jam
1 Remove paper jam.
2 Press Select to
continue.
Paper Out
1 Add paper.
2 Press Select to
continue.
Photo Mode
No image in a supported
format is present on the
memory card.
PictBridge Port
PictBridge or the
peripheral connected not
supported. Disconnect the
peripheral.
The memory card inserted in the printer is not
formatted correctly.
A jam has occurred in the ink cartridge support.
The ink cartridges are installed in the wrong
positions.
The photo or black cartridge is missing.
The colour cartridge is missing.
If the LCD displays Error followed by a 4-digit
number, a more serious error has occurred.
The Start button was pressed when the printer was
in Scan mode, but a computer was not found
connected to the printer.
A paper jam has occurred on the printer.
The printer has run out of paper.
The card inserted in the printer does not contain
any images in a supported format.
The type of peripheral connected is not supported,
or the USB mode set for the PictBridge digital
camera is not correct.
Reformat the memory card. For more
information, see the documentation supplied
with the digital camera.
Remove the support jam, then press the
Select button .
Remove the ink cartridges and reinstall them in
their correct positions. For more information,
see "Replacing Ink Cartridges".
Insert the black or photo cartridge into the
carrier on the left side. For more information,
see "Replacing Ink Cartridges".
Insert a colour cartridge into the carrier on the
right side. For more information, see
"Replacing Ink Cartridges".
Contact Customer Services. For more
information, visit our web site
support.dell.com or see "Error Messages
Listing".
Ensure that the printer is correctly connected
to the computer.
Remove the paper which has caused the jam.
For more information, see "Checking for Paper
Jams".
Load paper into the printer paper feeder, then
press the Select button
printing.
For more information, see "Loading Paper".
Remove the memory card.
Disconnect the peripheral or check the USB
mode setting. For more information, see the
documentation supplied with the digital
camera.
to continue