Dell 928 User Manual page 13

Swedish
German
Set the inactivity time after which the printer is automatically switched off: 10 mins, 30 mins, 60 mins or now.
When the printer is set up for energy saving mode (for any of the operator panel settings: 10 mins, 30 mins,
60 mins or now), you can restore it to normal operating mode by pressing one of the operator panel buttons,
or by sending a print, copy or scan operation from the computer.
Power
The printer remains in energy saving mode even if a device is connected to the PictBridge USB connector, or
Save
a compatible memory card is inserted. In this case, to use the printer again, the user must press any button
on the operator panel.
If a device is connected to the PictBridge USB connector or a compatible memory card is inserted, the printer
remains on and energy saving mode is disabled.
Bluetooth
Discovery Mode
Security
Bluetooth
Passkey
Settings
Device Name
Device Address
Paper Type
Render mode: Colour, B/W, sepia.
Border: Borderless, Bordered.
Layout: 1/page, 4/page, 9/page, 16/page.
Quality: Normal, Photo, Draft.
PictBridge
Settings
Paper Type: Plain, Coated, Photo, Transparency.
Brightness: 10 levels of brightness can be set.
Enhance: On, Off.
Red eyes: On, Off.
Print All
Prints a listing of the current settings for Setup mode.
Settings
Changing Bluetooth Default Settings
To print from an external Bluetooth-enabled device you must set up the printer for Bluetooth connectivity.
You can select, modify and display Bluetooth settings on your printer as follows:
1. In Setup mode, use the Arrow buttons
2. Press the Select button
Bluetooth Sub
Menu Item
Bluetooth
to highlight Bluetooth Default Settings.
to display the Bluetooth sub menu.
Settings
Enabled (default), Disabled.
When Bluetooth is Enabled, the printer accepts Bluetooth connections and allows the
USB Bluetooth adapter to communicate with other Bluetooth-enabled devices.
Enabled (default), Disabled.