Dell 928 User Manual page 68

Operator Display and/or
Error Code Computer Monitor
Message
Paper Jam in Input tray.
1100
(windows pop-up error
message)
Out of Paper. Refill Paper.
1101
(windows pop-up error
message)
Invalid Ink Cartridge
- Reload Dell Ink Cartridge.
1102
(windows pop-up error
message)
Black or colour cartridge not
inserted.
1103
(windows pop-up error
message)
The cartridge is not loaded
correctly. Swap cartridges.
1104
(windows pop-up error
message)
Auto alignment failed.
1105
(windows pop-up error
message)
Wrong card Media Slot used.
Insert in write media slot
4100
(windows pop-up error
message)
Card Read/Write Error.
Change media card.
4101
(windows pop-up error
message)
Unable to program Flash
Memory. Call Dell.
0200
(windows pop-up error
message)
Printer carriage stalled.
Clear carrier jam.
1200
(windows pop-up error
message)
Print Incomplete. Carrier
stall. Clear carrier jam.
1201
(windows pop-up error
message)
Incorrect data sent to printer.
Restart printer & resend print
1202
job.
(windows pop up error
message)
Ink cartridge shorted.
Replace ink cartridge.
Description
Paper jam or feed roller stalled.
Paper Out.
Ink cartridge ID is not valid.
The ink cartridge is missing.
Ink cartridge order is not supported.
Automatic Alignment failed.
The card media inserted is not valid for
the slot.
Problem reading or writing to the media
card.
Unable to program flash memory.
The ink cartridge carrier has stalled.
The print carrier stopped before all the
data was used.
Incorrect data has been sent from the
host PC to the AIO.
Short test detected short-circuit in the ink Lift the scanner unit and replace the ink
Solution
Clear jam and press the Select button to
continue.
Load paper and press the Select button
to continue.
Lift the scanner unit and swap ink
cartridges.
Raise the scanner unit and insert the ink
cartridge.
Lift the scanner unit and swap ink
cartridges.
Retry operation. If it still fails, contact
technical support.
Insert the correct type of memory card
into the slot and ensure that the card is
operational.
Insert the correct type of memory card
into the slot and ensure that the card is
operational.
Switch the printer off and on again.
Clear carrier jam and press the Select
button to continue.
Clear carrier jam and press the Select
button to continue.
Switch the printer off and on again.