Setting Up Your Printer; Setting The Language - Dell 928 User Manual

Photo all-in-one printer
Table of Contents

Advertisement

Number Part
Description
1
Paper feeder Part that supports the loaded paper.
2
Paper guide Guide that helps the paper feed into the printer properly.
3
Top cover
Upper cover of printer that holds your document or photograph in place while you scan it.
Tray that holds the paper output by the printer.
Paper output
4
tray
5
Scanner unit Unit you lift to gain access to the ink cartridges.
Ink cartridge
6
storage
Unit you use to store an unused black or photo ink cartridge.
garage
Ink cartridge
Carrier that holds two ink cartridges, one colour and the other black or photo. For more information on
7
carrier
your cartridges, see
Part under the scanner unit that keeps the printer open while you change ink cartridges.
Scanner
8
support
support towards the front of the printer, then lower the scanner unit until it rests on the main body of the
printer.
Slot into which you plug the power cable.
Power
9
connector
USB
Slot into which you plug the USB cable (sold separately). The other end of the USB cable is connected
10
connector
to your computer.
Memory card
11
Slots for inserting media cards containing digital pictures.
slots
USB port or
Slot for plugging a USB memory pen or USB cable (sold separately) that connects your printer to a
12
PictBridge
PictBridge-enabled camera. For more information, see
port
Camera".
Scanner
13
Surface on which to place your document or photo face downwards for copying or scanning.
glass
Operator
Panel on the printer for controlling copying, printing and scanning. For more information, see
14
panel
Operator

Setting Up Your Printer

NOTE:
The following operating systems are supported: Windows 2000 with Service Pack 4, 32-bit Windows XP with Service
Pack 2, 64-bit Windows XP with Service Pack 1, 32-bit Windows Vista ™ and 64-bit Windows Vista ™ .
Follow the instructions in the Setting Up Your Printer diagram to install the hardware and software. If you encounter
problems, see
"Installation

Setting the Language

Follow these instructions to set the language on your printer:
1. When you first power on your printer, press the Arrow buttons
in the Main menu, then press the Select button
2. Press the Arrow buttons
NOTE:
To extend the paper output tray, pull the tray out and flip out the extender.
"Replacing Ink
NOTE:
To close the printer and resume normal operations, lift the scanner unit, push the scanner
NOTE:
Insert the power cable into the printer before connecting the power cable to the wall socket.
Panel".
Problems".
to highlight Language.
Cartridges".
"Printing Photos from a PictBridge-Enabled
on the operator panel to highlight the Setup option
. The Setup sub menu is displayed.
"Using the

Advertisement

Table of Contents
loading

This manual is also suitable for:

928 all in one inkjet printer

Table of Contents