Dell 928 User Manual page 25

- Memory Stick PRO, DUO, Magic Gate
- SmartMedia
- Secure Digital
- MultiMedia Card
- xD-Picture Card
Memory cards must be inserted with their label upwards. The card reader is provided with two slots to connect this
type of device as well as a small LED that flashes to signal when data is being read or transmitted.
NOTE: Ensure the LED is off before inserting a memory card.
NOTICE: Do not remove the card while it is being read as the data could be damaged.
The connector used for the PictBridge can also be used to access information stored on a USB memory pen.
When you insert a memory card or USB memory pen, the Photo mode menu is displayed.
NOTE: Do not insert more than one memory card or USB pen at the same time.
NOTE: If the memory card is not recognised, an error message appears on the printer LCD. Press the
to the Main menu and insert a compatible memory card.
The following sub menu is used to perform operations on the photos present on the memory card:
When the sub menu is displayed, general information on the contents of the memory card is displayed at the top of
button to return