Resetting The Language; Resetting Factory Defaults; Using The Operator Panel - Dell 928 User Manual

3. Use the Arrow buttons
4. You can now:
Save your settings and return to the Main menu by pressing the
Exit without saving your settings by pressing the Cancel button
again to confirm. If you decide to save your changes, highlight Yes using the Arrow buttons
Select .

Resetting the Language

If you need to change the default language used on the operator panel, repeat the procedure in "Setting the
Language" described above.

Resetting Factory Defaults

If you need to restore the factory default settings, in the Main menu press and hold down the Menu button
for at least 10 seconds, until a message appears confirming the successful reset operation: "Restoring
factory default settings".

Using the Operator Panel

The operator panel buttons allow you to scan, copy and customise documents. The printer is on when the
power button is illuminated.
Number Part
Liquid Crystal Display
1
(LCD)
to display your language and select it by pressing Select
Description
Displays scanning, copying and printing options as well as status
and error messages.
.
button.
. A prompt appears asking for confirmation. Press
and then press