Lexmark E330 Service Manual page 116

4505
Parallel
Use the Parallel menu to change printer settings on jobs sent
through a parallel port.
Menu item
NPA Mode
Protocol
Parallel Mode 2
MAC Binary PS
* Factory default
3-8
Service Manual
Use setting to:
Send print jobs to the
printer and query printer
status information
simultaneously.
Receive information at a
much higher transmission
rate if your printer is set to
Fastbytes (if your
computer supports
Fastbytes) or receive
information at a normal
transmission rate if your
printer is set to Standard.
Determine whether the
parallel port data is
sampled on the leading
(On) or trailing (Off) edge
of strobe.
Configure the printer to
process Macintosh binary
PostScript print jobs.
Values
Off
On
Auto*
Standard
Fastbytes*
Off
On*
Off—The printer filters
PostScript print jobs using
Standard protocol.
On—The printer
processes raw binary
PostScript print jobs from
computers using the
Macintosh operating
system. This setting often
causes Windows print
jobs to fail.
Auto*—The printer
processes print jobs from
computers using either
Windows or Macintosh
operating systems.