Lexmark E330 Service Manual page 119

Network (continued)
Menu item
Set card speed
* Factory default
Use setting to:
Automatically detect the
connection speed of your
network.
This setting can be
disabled to set the speed
manually.
Values
Auto* – the printer detects
current network speed.
10Mbps, half duplex–
forces the printer to try to
connect to the network
only at 10Mbps, half
duplex.
10Mbps, full duplex–
forces the printer to try to
connect to the network
only at 10Mbps, full
duplex.
100Mbps, half duplex–
forces the printer to try to
connect to the network
only at 100Mbps, half
duplex.
100Mbps, full duplex–
forces the printer to try to
connect to the network
only at 100Mbps, full
duplex.
Diagnostic aids
4505
3-11