4505
Diagnostics menu selections
Development
Menu item
Edge–to–edge
Print quality test
pages
Continuous print -
simplex Tray 1
Print history
Defaults
Configuration ID
* Factory default
3-12
Service Manual
Use setting to:
Allow a shift of all four
margins (top, bottom, right
and left) to the physical edge
of the page (printable area of
supported paper).
Setting ignored by PPDS
interpreter.
Help isolate print quality
problems, such as streaking.
Three pages print:
• A text page with printer
information, cartridge
information, current
margin settings, and a
graphic.
• Two pages with graphics.
Note: Cartridge lockout
function disabled.
Continuously print pages
containing cross lines, printer
information and margin
settings.
Press
to stop.
Print history of errors.
Change sizes and
designations to metric.
Allow the printer's ID to
match the label's ID after the
controller card is replaced.
Value
Off*
On
U.S.*
Non-U.S.
000101*
000189