Dukane 403570-01 User Manual page 29

Touch Screen Display
The display is a 4.6 inch (12 cm) wide by 3.5 inch (9cm)
tall color LCD screen shown in Figure 4-1. It contains
an integrated touch screen with 192 touch–sensitive
cells arranged as 16 rows of 12 columns.
Setup parameters and mode selections are programmed
through the touch screen. A closeup view of the controls
is shown in Figure 4–2. The left side of the display
remains visible for most of the selected functions.
The icon in the upper left corner indicates machine
status. Below that are three touch cells for Run mode
( ), Weld and Post–Weld Setup (
RUN
Utilities ( ). The functions of these buttons are
TOOLS
covered in Chapter 5. The touch cell on the right labeled
displays part data for the previously welded
Part Data
assemblies.
Dukane Manual Part No. 403-570-01
), and Setup
SETUP
Figure 4–1 Dual Servo Spin Welder Touch Screen
Figure 4–2 Startup Screen
Section 4 - Display and Controls
Touch
Screen
Display
Upper Tooling
Hub
Panel
Trigger
Indicator
Page 3