Dukane 403570-01 User Manual page 24

Dual Servo Spin Welder User's Manual
AC Power
The Dual Servo Spin Welder requires a 240 VAC 1–
phase outlet rated at 20 Amps. All machine models use
the same power cord and plug. The AC power cord is
permanently attached to the welder. The other end of
the cable has a 240 VAC, 1–phase plug shown in Figure
3–4. This is designed for a NEMA 6–20R configuration
wall receptacle shown in Figure 3–5.
Directly below the AC cord strain relief is the AC power
switch. The switch combines the functions of a power
switch and a 20 Amp circuit breaker. The breaker/switch
is identical on all models and is shown in Figure 3–6.
Page 1
240 Volt AC Plug
240 Volt AC Plug
(NEMA 6–20P)
(NEMA 6–20P)
Figure 3–4 20–Amp 240V
Plug
AC Power Switch
Figure 3–6 AC Power Switch and Power Cord
Dukane Manual Part No. 403-570-01
240 Volt AC Socket
240 Volt AC Socket
(NEMA 6–20R)
(NEMA 6–20R)
Figure 3–5 20–Amp 240V
Receptacle
AC Power Cord