Resetting The Standard Product Defaults; Test Menu; Pqa (Print Quality Assessment) - Datalogic POWERSCAN 7000 2D Imager Product Reference Manual

Utilities
Resetting the Standard Product
Defaults
If you aren't sure what programming options are in your imager, or
you've changed some options and want the standard product default set-
tings restored, scan the Standard Product Default Settings bar code below.
Standard Product Default Settings
Menu Commands on page 10-6
for each of the commands (indicated by an asterisk (*) on the program-
ming pages).

Test Menu

When you scan the Test Menu On code, then scan a programming code
in this manual, the imager displays the content of a programming code.
The programming function will still occur, but in addition, the content
of that programming code is output to the terminal.
This feature should not be used during normal
imager operation.
NOTE
On
2D PQA (Print Quality Assessment)
Two-dimensional Print Quality Assessment (2D PQA) is a feature of the
imager where the data from the successful read of a 2D bar code symbol
is augmented with lines of text that both identify the symbol, and also
report graded measurement parameters obtained from it.
9-2
lists the standard product default settings
PowerScan
* Off
®
7000 2D