Chapter 10 Serial Programming Commands; Conventions - Datalogic POWERSCAN 7000 2D Imager Product Reference Manual

Serial Programming
Serial Programming Commands
The serial programming commands can be used in place of the program-
ming bar codes. Both the serial commands and the programming bar
codes will program the PowerScan 7000 2D. For complete descriptions
and examples of each serial programming command, refer to the corre-
sponding programming bar code in this manual.
The device must be set to an RS-232 interface (see the Quick Reference
Guide). The following commands can be sent via a PC COM port using
terminal emulation software.

Conventions

The following conventions are used for menu and query command
descriptions:
parameterA label representing the actual value you should send as part of
a command.
[option]An optional part of a command.
{Data}Alternatives in a command.
bold Names of menus, menu commands, buttons, dialog boxes, and
windows that appear on the screen.
Product Reference Guide
Chapter 10
Commands
10-1