Datalogic POWERSCAN 7000 2D Imager Product Reference Manual page 88

Symbologies
UPC-A Addenda
This selection adds 2 or 5 digits to the end of all scanned UPC-A data.
Default = Off for both 2 Digit and 5 Digit Addenda.
2 Digit Addenda On
5 Digit Addenda On
UPC-A Addenda Required
When Required is scanned, the imager will only read UPC-A bar codes
that have addenda. You must then turn on a 2 or 5 digit addenda listed
on page 6-20. Default = Not Required.
Required
UPC-A Addenda Separator
When this feature is on, there is a space between the data from the bar
code and the data from the addenda. When turned off, there is no space.
Default = On.
* On
6-20
* 2 Digit Addenda Off
* 5 Digit Addenda Off
* Not Required
Off
®
PowerScan 7000 2D