Datalogic POWERSCAN 7000 2D Imager Product Reference Manual page 86

Symbologies
Telepen
On
* Off
Telepen Output
Using AIM Telepen Output, the imager reads symbols with start/stop
pattern 1 and decodes them as standard full ASCII (start/stop pattern 1).
When Original Telepen Output is selected, the imager reads symbols
with start/stop pattern 1 and decodes them as compressed numeric with
optional full ASCII (start/stop pattern 2). Default = AIM Telepen Out-
put.
* AIM Telepen Output
Original Telepen Output
Telepen Message Length
Scan the bar codes below to change the message length. Refer to
Mes-
for additional information. Mini-
sage Length Description on page 6-2
mum and Maximum lengths = 1-60. Minimum Default = 1, Maximum
Default = 60.
Minimum Message Length
Maximum Message Length
®
6-18 PowerScan 7000 2D