Datalogic POWERSCAN 7000 2D Imager Product Reference Manual page 78

Symbologies
When Check Digit is set to , the imager only reads
Validate and Transmit
Interleaved 2 of 5 bar codes printed with a check digit, and will transmit
this digit at the end of the scanned data. Default = No Check Digit.
* No Check Digit
Validate, but Don't Transmit
Validate and Transmit
Interleaved 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to
Mes-
for additional information. Mini-
sage Length Description on page 6-2
mum and Maximum lengths = 2-80. Minimum Default = 4, Maximum
Default = 80.
Minimum Message Length
Maximum Message Length
®
6-10 PowerScan 7000 2D