Data Format Editor; Data Formatter - Datalogic POWERSCAN 7000 2D Imager Product Reference Manual

ED Check to make sure there is a non-numeric ASCII character at the current
cursor position. If character is numeric, format is aborted. Syntax = ED.
D ata Form at Editor
Enter Data Format
Clear One Data Format
Save
D ata Form atter
When Data Formatter is turned off, the bar code data is output to the
host as read (including prefixes and suffixes). Choose one of the follow-
ing options. Default = Data Formatter On, but Not Required.
* Data Formatter On,
but Not Required
When Data Formatter is required, all input data must conform to an
edited format or the imager does not transmit the input data to the host
device.
Data Format On, Format Required
Product Reference Guide
Data Format Editor Introduction
* Default Data Format
Clear All Data Formats
Discard
Data Formatter Off
5-5