Using Programming Bar Codes; Configure Other Settings; Resetting Standard Product Defaults - Datalogic QuickScan 21 Series Quick Reference Manual

Table of Contents

Using Programming Bar Codes

This manual contains bar codes which allow you to reconfig-

ure your reader. Some programming bar code labels, like the

"Standard Product Default Settings" on page 11, require only

the scan of that single label to enact the change.

Other bar codes require the reader to be placed in Program-

ming Mode prior to scanning them. Scan an ENTER/EXIT bar

code once to enter Programming Mode; scan the desired

parameter settings; scan the ENTER/EXIT bar code again to

accept your changes, which exits Programming Mode and

returns the reader to normal operation.

Additional programming bar codes are available in the PRG to

allow for customizing programming features. If your installa-

tion requires different programming than the standard fac-

tory default settings, refer to the PRG.

Reference the PRG for a listing of standard factory settings. If

you aren't sure what programming options are in your reader,

or you've changed some options and want the factory set-

tings restored, scan the

code below to copy the factory configuration for the currently

active interface to the current configuration.

Factory defaults are based on the interface

type. Configure the reader for the correct inter-

face before scanning this label.

NOTE

Quick Reference Guide

Standard Product Default Settings

Programming

bar

Table of Contents

Quickscan qm21x1