Datalogic POWERSCAN 7000 2D Imager Product Reference Manual page 79

Linear Symbologies
Code 93
< Default All Code 93 Settings >
Code 93 Enable
* On
Off
Code 93 Message Length
Scan the bar codes below to change the message length. Refer to
Mes-
for additional information. Mini-
sage Length Description on page 6-2
mum and Maximum lengths = 0-80. Minimum Default = 0, Maximum
Default = 80.
Minimum Message Length
Maximum Message Length
Code 93 Code Page
Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be
because the bar code being scanned was created using a code page that is
different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar codes
were created (see )
Code Page Mapping of Printed Bar Codes on page A-7
and scan the value and the bar code from the
Save
Programming Chart on
of this manual. The data characters should then appear prop-
page B-5
erly.
Code 93 Code Page
Product Reference Guide 6-11