Smooth Fitness CE-8.0LC Owner's Manual page 10

"A I
SSEMBLY NSTRUCTIONS"
S –
TEP 13 Wire Assembly
a. Connect the Upper Pulse Sensor Wire (111) to the Middle Pulse Sensor Wire (112).
b. Connect the Upper Connection Wire (108) to the Middle Connection Wire (109).
NOTE: The number of wire pin should be the same for both wires to connect with as the drawing
shown on the right.
S –
TEP 14 Console & Console Bracket Assembly
a. Place the Console (17) onto the Upright Post (4) and secure wit h the Round Head Screws (M5xp0.8x15mm) (80).
b. Attach the Console Back Cover (19) to the Console (17) under the Stationary Handlebar (5) and secure with the
Round Head Screws (M5xp0.8x15mm) (80).
c. Slide the Console Bracket (18) onto the Console (17) and secure with the Round Head Screws (M5xp0.8x15mm)
(80).
S –
TEP 15 Accessory Tray Assembly
NOTE: For shipping purpose, the Round Head Screws (M5xp0.8x15mm) (80) are attached on
the Upright Post (4).
a. Remove the Round Head Screw (M8xp1.25x15mm) (80) from the Upright Post (4).
b. Attach the Accessory Tray (23) onto the Upright Post (4) and secure with the Round
Head Screw (M5xp0.8x15mm) (80).
10