Returning The Unit To The Factory Default State - Panasonic AWRP120 Operating Instructions Manual

Returning the unit to the factory default state (INITIALIZE)
Returning the unit to the factory default
state
1 .
Press the MENU button .
2 .
Open SYSTEM menu [49] .
3 .
Turn the F1 dial to display the "1 . INITIALIZE" item .
1 .I NITIA L IZ E
4 .
Turn the F2 dial to select "ALL" or "SETUP", and then
press the F2 dial to confirm the selection .
INITIALIZE is executed .
ALL : Restores all settings to the factory default state (executes
INITIALIZE) .
SETUP: Restores only some settings to the factory default state
(executes INITIALIZE) .
Note
z The unit needs to be rebooted after selecting "ALL" and then
z
executing INITIALIZE . Turn the power off and then back on .
42
A L L
(continued)