Operating The Osd Menu Of A Remote Camera - Panasonic AWRP120 Operating Instructions Manual

Operating the OSD menu of a remote camera

To set the advanced settings of a remote camera, operate the menu superimposed on the image output of the remote camera (this menu is referred to
as the OSD menu in this manual) . The OSD menu of a connected remote camera can be operated from the unit .
F1 dial
F2 dial
1 .
Hold down the CAMERA OSD button to turn on its indicator .
The OSD menu of the selected remote camera appears and becomes able to be operated from the unit .
2 .
Operate the OSD menu .
Use the F1 dial, F2 dial, and EXIT button to operate the OSD menu .
Operation differs depending on the model connected .
<Table of operations>
Remote camera
Turn the F1 dial .
AW‑HE50
AW‑HE60
Press the F1 dial .
AW‑HE120
Press the EXIT button .
AK‑HC1500
Turn the F1 dial .
AK‑HC1800
AW‑HE870
Press the F1 dial .
Turn the F1 dial .
AW‑E350
Press the F1 dial .
AW‑E650
AW‑E750
AW‑E860
Turn the F2 dial .
AW‑HE100
( * 1) Turn clockwise
Turn counterclockwise
( * 2) Turn clockwise
Turn counterclockwise
( * 3) Turning the dial changes the setting and instantaneously reflects the new value on the remote camera .
Turn clockwise
Turn counterclockwise
3 .
Hold down the CAMERA OSD button to turn off its indicator .
The menus of the unit become able to be operated .
Notes
z When the unit is operating the OSD menu of a remote camera, the CAMERA OSD button lighting state and OSD menu display state may no
z
longer match and OSD menu operation may not be able to be performed properly if the OSD menu OFF operation is performed for the same
remote camera from, for example, another remote camera controller or a wireless remote controller .
In such a case, hold down the CAMERA OSD button on the unit, and after the CAMERA OSD button lighting state (off) and OSD menu display
state (OSD menu hidden) match, hold down the CAMERA OSD button again and then perform the operation .
z If a camera selection button [CAMERA SELECT/GROUP SELECT] is pressed to switch to another remote camera to control from the unit during
z
the display of the OSD menu of a remote camera, the OSD menu of the remote camera that was selected disappears .
z For details on the menu items that are displayed, check the Operating Instructions for the corresponding model .
z
CAMERA OSD button
EXIT button
Dial/button operation
: Moves the items down .
: Moves the items up .
: Changes the setting in the plus (+) direction .
: Changes the setting in the minus (–) direction .
: Changes the setting in the plus (+) direction and confirms the value .
: Changes the setting in the minus (–) direction and confirms the value .
OSD menu operation
z Moves the items ( * 1) .
z
z Selects a setting ( * 2) .
z
Confirms the change to the selected setting .
Cancels the selected setting .
z Moves the items ( * 1) .
z
z Selects a setting ( * 2) .
z
Confirms the change to the selected setting .
Moves the items ( * 1) .
Confirms the sub‑menu selection .
*
z Changes the setting directly (
z
z Confirms the sub‑menu selection .
z
.
3)
11