Preparing to use the unit
p p Batteries are not supplied with this remote controller.
Prepare 2 size "AA" dry batteries that can be used.
w Inserting the dry batteries
p
1
Remove the battery compartment cover.
2
Insert the dry batteries.
• Check which ends of the batteries are the "" electrodes and which ends are the "" electrodes.
Load the batteries correctly by inserting the negative end first.
Usable batteries:
SUM-3, AA, R6P, R6S, LR6
3
Put the battery compartment cover back.
Replacing the dry batteries
• When removing the dry batteries, remove them from the end of the batteries.
• The battery life span may be reduced under some conditions of use.
• When the distance from which the unit is able to operate the camera is becoming progressively shorter, it
is time to replace the dry batteries with two new ones.
Do not use one old battery and one new one together, and do not use two different kinds of dry batteries
together.
• Dispose of batteries that are no longer usable together with other incombustible garbage or in
compliance with the local ordinances.
(6)
Need help?
Do you have a question about the AW-RM50AG and is the answer not in the manual?