Operating Preset Memory (Pmem) - Panasonic AWRP120 Operating Instructions Manual

Operating preset memory (PMEM)

The preset memory of a remote camera can be operated from the unit .
The following settings that you have adjusted in advance can be stored
in preset memory .
z Pan/tilt positions z Lens iris settings (manual iris only)
z z
z Zoom positions z White balance settings
z z
z Focus positions z Gain
z z
Notes
z If the MEM ENABLE button indicator is off, preset memory
z
operation is not possible . Press the button to turn on its indicator
and then perform operation .
z Preset numbers PMEM 1 to 10 are also used as start positions
z
when recalling tracing memory . Preset data may be overwritten
by tracing memory operation .
z The number of preset memory that can be registered differs
z
depending on the remote camera .
For details, check the Operating Instructions for the
corresponding model .
z The white balance setting and gain are registered to only the
z
preset memory of AW‑HE50, AW‑HE60, and AW‑HE120 .
The white balance setting that is registered is that which results
from application of manual R/B gain adjustment to the automatic
white balance adjustment .
When the preset memory is recalled, the same color tones as at
the time of registration are reproduced but the R/B gain values
become 0 .
MEM DELETE button
PMEM button
MEM STORE button
PMEM PAGE
indicators
PMEM PAGE
button
Number buttons
[1] to [50]
12
MEM SETTING button
MEM ENABLE button
z Changing pages
z
Press one of the number buttons [1] to [50] to directly select any of the
50 preset memory .
Furthermore, pressing the PMEM PAGE button to change pages allows
you to operate up to 100 preset memory for each camera .
Button indicator on
Press the PMEM
PAGE button .
Page 1 selected
<Preset numbers and registered pages>
Preset number
PMEM 1 to PMEM 50
PMEM 51 to PMEM 100
Example: When specifying preset number "PMEM 51"
1 . Press the PMEM PAGE button to select Page 2 .
2 . Press number button [1] .
z Lighting of number button indicators
z
The lighting method of the number buttons differs depending on the
remote camera or pan‑tilt head that the unit is controlling .
<Lighting method of number button indicators>
Remote cameras and
pan‑tilt heads
AW‑HE50, AW‑HE60, The indicators of the number buttons with
AW‑HE120 preset memory registered turn on .
AW‑HE100, AW‑PH360, The indicator of the number button that
AW‑PH405, AW‑PH650, was last pressed turns on .
AW‑PH400 However, when preset memory is deleted
in DELETE mode, all of the number
buttons turn off .
Button indicator on
Page 2 selected
Page number Number button
Page 1
[1] to [50]
Page 2
Lighting method of number button
indicators