Setting Linking With A Switcher; Registering The Camera Numbers That Will Correspond To The Image; Inputs Of The Switcher; Enabling Or Disabling The Function For Linking With The Switcher - Panasonic AWRP120 Operating Instructions Manual

Setting linking with a switcher

Configure the settings for linking the unit with an optional switcher .
To use the function for linking with a switcher, you need to set the
following in advance .
„ Settings for the connection between unit and switcher
„
Refer to "Settings for connecting with the remote cameras and
switcher" in <Basics> (page 29) .
„ Settings on the switcher
„
The following settings can be configured on the AW‑HS50 .
z Enabling the function for linking with the unit
z
Set the "10 . CamCont Link" item of [13] Operation Menu to "On" .
z Displaying the remote camera names sent by the unit
z
Set the "4 . Name Type" item of [10 .1] SDI‑IN1 to [10 .4] SDI‑IN4
or the "2 . Name Type" item of [10 .5] DVI‑IN in [10] Input Menu to
"CAM Name" .
z Displaying icons at the bottom left of the sub screen for
z
images of the remote camera selected on the unit when the
switcher is outputting images of multi view
Set the "6 . Input Status" item of [8] MultiView Out/Frame Menu to
"On" .
For details, refer to the Operating Instructions for the switcher .
„ Registering the camera numbers that will correspond
„
to the image inputs of the switcher
Refer to the relevant explanation in this section .
„ Enabling or disabling the function for linking with the
„
switcher
Refer to the relevant explanation in this section .
Registering the camera numbers that will
correspond to the image inputs of the
switcher
1 .
Press the MENU button .
2 .
Open SW INPUT menu [43] .
3 .
Turn the F1 dial to display the input signal of the
switcher to be set .
1 .IN P U T 1
Input signal : Select from 1 . INPUT1 to 100 . INPUT100 .
4 .
Turn the F2 dial to select the corresponding camera
number, and then press the F2 dial to confirm the
selection .
C A M 1
Enabling or disabling the function for
linking with the switcher
Enable or disable the entire function for linking between the unit and
switcher .
1 .
Press the MENU button .
2 .
Open SW FUNCTION menu [42] .
3 .
Turn the F1 dial to display the "1 . SWLINK" item .
1.SWLINK
4 .
Turn the F2 dial to select "On" or "Off", and then press
the F2 dial to confirm the selection .
On : Enables the function for linking with the switcher .
Off : Disables the function for linking with the switcher .
z Enabling and disabling the link function can be assigned to a USER
z
button .
Open USER BUTTON menu [35], display one of the "1 . USER1"
to "8 . USER8" items, and set "SWLINK" .
z When the USER button with "SWLINK" assigned is pressed, the
z
operation is as follows .
Button indicator on : Enables the function for linking with the
switcher .
Button indicator off : Disables the function for linking with the
switcher .
Note
z Up to one AW‑RP120 or AW‑RP50 can be linked to one switcher .
z
Therefore, it is not possible to link the unit to a switcher that
already has another AW‑RP120 or an AW‑RP50 linked . Disable
the link function of the unit that is already linked and then enable
the link function on this unit .
On
31