Loading Data From A Memory Card (Load); Deleting The Files Saved To A Memory Card (Delete) - Panasonic AWRP120 Operating Instructions Manual

Memory card operations

Loading data from a memory card (LOAD)

1 .
Press one of the camera selection buttons
[CAMERA SELECT/GROUP SELECT] to select a remote
camera .
2 .
Press the MENU button to turn on its indicator .
3 .
Open SD LOAD menu [47] .
L O A D M O D E : R P D A T
4 .
Turn the F1 dial to select the type of data to load from
the memory card, and then press the F1 dial to confirm
the selection .
The file saved to the memory card is displayed on the second line of
the LCD panel .
LO A D MODE : R P ME M
z You can select a data type from RPDAT, RPMEM, CAM, and UPG .
However, when a remote camera connected via a serial
connection is selected, CAM and RPMEM cannot be selected .
z When no memory card is inserted, "NO CARD!" appears .
5 .
Turn the F2 dial to select a file, and then press the F2
dial to confirm the selection .
The data begins to be read from the memory card and transferred to
the unit or selected remote camera .
z When a file that cannot be loaded to the selected remote camera
is specified (when, for example, you specify a file of a remote
camera that is a different model), "LOAD ERROR!" appears .
L O A DI N G...
N O T R E M O V E C A R D
C O M PL E T E
z When loading completes, "COMPLETE" appears .
z When loading fails, "LOAD ERROR!" appears . Save the data to
the memory card again and then execute loading again . If loading
is still not possible, replace the memory card .
Note
z When "UPG" is selected as the data type and then LOAD is
z
executed, the unit needs to be restarted after loading of the data
completes .
Turn the unit's power off and then back on .
38
(continued)
RP 1 0 . m1 2
Deleting the files saved to a memory card
(DELETE)
1 .
Press the MENU button to turn on its indicator .
2 .
Open SD DELETE menu [48] .
DEL MODE :RPDAT
3 .
Turn the F1 dial to select the type of data to delete, and
then press the F1 dial to confirm the selection .
The name of the file saved to the memory card is displayed on the
second line of the LCD panel .
DEL MODE :RPMEM
z You can select a data type from RPDAT, RPMEM, CAM, and LOG .
For the operation when "INIT" is selected, refer to "Initializing a
memory card (INIT)" (page 37) .
z When no memory card is inserted, "NO CARD!" appears .
4 .
Turn the F2 dial to select a file to delete, and then press
the F2 dial to confirm the selection .
The file is deleted .
COMPLETE
z When deleting completes, "COMPLETE" appears .
z When deleting fails, "DELETE ERROR!" appears . Save any
necessary files to a computer and then initialize the memory card .
RP10.m12