Setting The Movement Ranges (Limiter Function); Of A Remote Camera; Returning A Remote Cameras To Its Home Position - Panasonic AWRP120 Operating Instructions Manual

Configuring the remote camera operation settings
Setting the movement ranges (limiter
function) of a remote camera
Depending on the installation location, there may be an obstruction in
a movement range of a remote camera, and the remote camera may
come into contact with that obstruction when the pan or tilt operation is
performed .
A malfunction or accident may occur if the remote camera comes into
contact with the obstruction so you need to set a limiter in front of the
obstruction to prevent contact .
Also set a limiter if there is a subject you do not wish to shoot in a
movement range .
From the unit, you can configure the remote camera limiter setting for
the direction of each of the up, down, left, and right limits .
Setting procedure
1 .
Press the MENU button .
2 .
Open PTZ ADJUST menu [30] .
3 .
Turn the F1 dial to display the "3 . LIMIT UP" item .
„ When AW‑HE50, AW‑HE60, or AW‑HE120:
„
4 .
Turn the F2 dial to select "On", and then press the F2
dial to confirm the selection .
The position in the up direction of the currently selected remote
camera is set as the up limit and the limiter is enabled .
(The setting is stored in the remote camera .)
3. L I M I T U P
3. L I M I T U P
3. L I M I T U P
z Turning the F2 dial to display "Off↓" and then pressing the F2 dial
to confirm the selection cancels the limiter .
(continued)
O f f
Turn the F2 dial .
O n
Press the F2 dial .
O n
„ When other remote camera
„
4 .
Press the F2 dial to confirm the setting .
The position in the up direction of the currently selected remote
camera is set as the up limit and the limiter is enabled .
(The setting is stored in the remote camera .)
3.LIMIT UP
3.LIMIT UP
z If the F2 dial is turned or the F1 dial is turned to display another
item and then the "3 . LIMIT UP" item is redisplayed, "EXEC↓"
reappears on the second line of the LCD panel .
If the F2 dial is pressed at this time, "LIMIT OFF" is displayed and
the limiter is canceled .
5 .
Turn the F1 dial to display the "4 . LIMIT DOWN",
"5 . LIMIT LEFT", or "6 . LIMIT RIGHT" item .
Perform the same operation as step 4 to set the down limit, left limit,
and right limit .
Menu item
LIMIT UP
LIMIT DOWN
LIMIT LEFT
LIMIT RIGHT
Returning a remote cameras to its home
position
Move a remote camera to the home position stored in advance on the
camera .
Note
z The position stored as the home position on the remote camera
z
cannot be changed .
1 .
Press the MENU button .
2 .
Open CAMERA SETUP menu [24] .
3 .
Turn the F1 dial to display the "5 . HOME POSITION"
item .
5.HOME POSITION
4 .
Press the F2 dial .
The remote camera moves to its home position .
EXEC
Press the F2 dial .
LIMIT ON
Setting target
Up limit
Down limit
Left limit
Right limit
SET
25