Technical Specifications - Cobalt Digital Inc openGear 9034-SD Owner's Manual

Technical Specifications

Table 4. Card - Technical Specifications
Analog Video
Input
Category
Serial Digital
Video Outputs
AES Audio
Input
Page 22 of 28
Number of Inputs
Input Type
Video Inputs
Conversion Bit Depth
SD Color Separation
Frequency Response
Differential Phase
Differential Gain
Noise
Analog Front End Crosstalk
Return Loss
Parameter
Number of Outputs
Impedance
Return Loss
Signal Level
DC Offset
Jitter
Overshoot
Standard
Number of Inputs
Input Level
Input Impedance
Return Loss
Equalization
Sample Rate
3
Differential, Common Mode Rejection (5V AC)
SD: Composite, Component YPbPr (BetaCam™,
MII™, SMPTE/N10), RGB, and Y/C
12-Bits
5-Line Adaptive Comb or Notch Filter
SD: Y- 0-30MHz ± 0.25db PbPr 0-15 MHz ±
SD: < ±0.4° typical
SD: < ±0.4% typical
< -64dB (Luma Flat Field)
< -61dB (Luma Ramp)
Within Noise Floor Measurement
> 20dB to 30MHz
Specification
2:SD-SDI BNC per IEC 60169-8 Amendment 2
75Ω
> 15 dB at 5MHz – 270MHz
800 mV ±10%
0 Volts ±50 mV
SD: <0.06UI (all outputs)
<0.2% of amplitude
SMPTE 276M
8 unbalanced
0.1 to 2.5V p-p (5V p-p tolerant)
75Ω
> 12dB 100kHz to 6MHz
Automatic to 1000m with Belden 1694A (or
equivalent) @ 48kHz AES signal
48KHz
9034-SD Owner's Manual • • • • (V 2.0)