Table of Contents
Advertisement
1
Alarm Function
User Control Interface
Technical Specifications
1-12
GPO Interface
Two independent phototransistor non-referenced (floating) contact pairs
(
and
) are available. A GPO can be invoked by setting a GPO
GPO 1/1
GPO 2/2
to be enabled when a preset is in turn applied (i.e., when a preset is invoked
(either manually or via event-based loading), the GPO is correspondingly also
activated.
Serial (COMM) Ports
The BBG-1002-2UDX-DI is equipped with two, 3-wire serial ports (
,
Serial Port 1
COM 2 - Serial Port 2
de-embedding to an output port, and provide RS-485 LTC I/O (when licensed
with option
). Either port can be configured as RS-232 Tx/Rx or RS-422
+LTC
non-duplexed Tx or Rx.
The unit can be set to monitor input video/audio for input errors such as input
LOS, frozen or black frame, loss of reference, closed captioning ancillary data
loss, and/or per-channel audio absences. These alarms can be propagated as a
general error or warning message, and can be downloaded as basic .txt logs or
via a Syslog function.
User setup tables configure the alarm severity escalation as well as trigger
holdoff/release and other thresholds as applicable.
BBG-1002-2UDX-DI uses an HTML5 internal web server for control/
monitoring communication, which allows control via a web interface with no
special or unique application on the client device. Connection to the device to
the network media connection is via a standard 10/100/1000 RJ-45 Ethernet
connection. The device can also be controlled using DashBoard™ remote
control, where it appears as a frame connection.
Table 1-1 lists the technical specifications for the BBG-1002-2UDX-DI
Standalone 3G/HD/SD-SDI Dual-Channel De-interlacing Up-Down-Cross
Converter / Frame Sync unit.
BBG-1002-2UDX-DI PRODUCT MANUAL
Technical Specifications
). The ports provide for SMPTE 2020
BBG-1002-2UDXDI-OM (V1.0)
COM 1 -
Advertisement
Table of Contents
Troubleshooting
